Timeseries of datapoints
Figure 1: Lineplot of several datapoints, legend below the datapoints
Below the analyses and recommended actions, the time series of the assigned datapoints of a component are displayed in different colors. For a better overview, the displayed timeseries are listed in a legend below the diagram. The list includes further information such as the displayed unit of the timeseries, further tags, and the possibility to hide a timeseries.
The following functions are available:
When selecting a component, the values of the last 7 days are always displayed. By clicking on the existing time period, you can select a new time period as desired. To do this, always select the start date first, then the end date and click on "ok".
Follow analysis period
By clicking on the "Follow analysis period" checkbox, the period of the analysis selected above will automatically be used.
If you point with the mouse pointer to a position in the data series, the exact value and time will be displayed.
Detailed view of several values
Draw a frame around the time range you want to examine more closely by holding down the left mouse button. As soon as you release the mouse button, only the framed time range is displayed (zooming). To leave this view, click on the "Reset Zoom" button that has now appeared.
Hide data point
If you click on the "eye symbol", the corresponding data point will be hidden.
Changing the unit used¶
The currency used and the units displayed can be customized using the profile overview. A guide on how to select the currency and the unit system is given in the user profile section. Selecting the unit changes the display of the timeseries, as the observations stored in the timeseries are now converted to the target system. For example, the timeseries of a temperature can be converted between the metric system and the international SI system of units. This conversion works for individually reviewed datapoints in the Data Inspector, for results and values of our AI-based control algorithms, as well as for entire components in the Operations Cockpit. Figure 2 shows the timeseries of the component Heating Circuit 4. The unit system here is set to Metric.
Figure 2: Lineplot of the datapoints of the component Heating Circuit 4 using the Metric System
By changing the selected unit of display to the international SI system, all datapoints are converted from the metric to the SI system. The result is shown in Figure 3. It can be seen that the temperature value changes as a result of the unit conversion. All other values remain the same, as there are no differences between the metric and SI systems of units for these.
Figure 3: Lineplot of the datapoints of the component Heating Circuit 4 using the SI System